Taken with Pentax 750z camera at 32mm EP on my C9.25.
Saturday, December 17, 2005
Wednesday, December 14, 2005
Sunday, December 11, 2005
Three views of Copernicus 10th dec.
Friday, December 09, 2005
Thursday, December 08, 2005
Hyginus & Rille
Tuesday, December 06, 2005
Mars 6th Dec.
Had a few good nights recently here in Wiltshire. These are all taken using a Celestron red #25 filter, using a Tele Vue 3X Barlow (nicked from my mate Ray, while I've got all his gear round my house at present ;-))They are the best 300 odd frames taken from about 1500. The seeing got better later on, although there was fog/mist in the air.
Saturn and it's moons
Monday, December 05, 2005
Sunday, December 04, 2005
Saturday, December 03, 2005
Bob's Knobs
I just got a set of Bob's Knobs from the States.
I managed to install them in about two minutes, by pointing the scope down, and taking out and replacing one screw at a time.
I then roughly collimated by standing about 5 feet from the scope and looking with one eye until the mirrors were straight. As per instructions from 'Bob'.
I've just been out tonight to do a more precise collimate. First thing... it wasn't far out anyway, but! using Bob's Knobs is a dream. I know that you are not supposed to use a diagonal. But with it, I managed to collimate by just looking through the EP and twiddling the 'Knobs'. It was bloody great. You can tell precisely how tight the screws are, and can get a real feel for it.
It's gone cloudy now, so I wasn't able to finish the job, but it should be piss easy from now on.
Thanks Damian Peach for the suggestion.
http://www.damianpeach.com/
and Bob for the knobs.
http://www.bobsknobs.com/
I managed to install them in about two minutes, by pointing the scope down, and taking out and replacing one screw at a time.
I then roughly collimated by standing about 5 feet from the scope and looking with one eye until the mirrors were straight. As per instructions from 'Bob'.
I've just been out tonight to do a more precise collimate. First thing... it wasn't far out anyway, but! using Bob's Knobs is a dream. I know that you are not supposed to use a diagonal. But with it, I managed to collimate by just looking through the EP and twiddling the 'Knobs'. It was bloody great. You can tell precisely how tight the screws are, and can get a real feel for it.
It's gone cloudy now, so I wasn't able to finish the job, but it should be piss easy from now on.
Thanks Damian Peach for the suggestion.
http://www.damianpeach.com/
and Bob for the knobs.
http://www.bobsknobs.com/
Wednesday, November 30, 2005
Monday, November 28, 2005
Sunday, November 27, 2005
Saturday, November 26, 2005
Friday, November 25, 2005
Wednesday, November 23, 2005
Subscribe to:
Comments (Atom)
















































